Ai-thinker has started building open-source hardware and in that they have launched camera development boards, which are AiPi-Cam-U and AiPi-Cam-D. These are specifically designed for development with Camera and connectivity (Wi-Fi/BLE)
Letโs take a look at the details and what is the difference between AiPI-Cam-U and AiPi-Cam-D.
Aithinker AiPi-Cam-U
AiPi-Cam-U is a camera development board built with Ai-M61-32S module by Ai-Thinker which supports WiFi6 and BLE5.3.
The Ai-M61-32S module has rich peripheral interfaces, including DVP, MJPEG, Display, Audio Codec, USB2.0, SDU, Ethernet (EMAC), SD/MMC(SDH), SPI, UART, I2C, I2S, PWM, GPDAC, GPADC, ACOMP and GPIO.
AiPi-Cam-U integrates USB-C, which can be used to connect to a USB camera.
AiPi-Cam-U
- System Block Diagram
- USB Camera Port
Aithinker AiPi-Cam-U Pinouts
IO breakout, convenient for connecting external devices.
Aithinker AiPi-Cam-U Documentation
Ai-Thinker official website docs๏ผโhttps://docs.ai-thinker.com/cam-u
AiPi-Cam-U LCSC open source address๏ผโhttps://oshwhub.com/ai-thiner_openteam/m6132camโ (Note: If the link is not working for you, please try again later)
Aithinker AiPi-Cam-D
AiPi-Cam-D is a camera core board is designed by Ai-Thinker by using high-performance module Ai-M61-32S. Its pins are fully compatible with Ai-WB1-32S-CAM, and SD Card holder is added to make up for the limitation of Ai-WB1-32S-CAM.
AiPi-Cam-D board accesses to a 0.3 Mega pixel camera by default, and breaks out all unused pins to headers, which is convenient for development.
- System Block Diagram
- Camera circuit
The camera adopts the classic 24Pin FPC connector, which is compatible with many camera available in the market.
Note:
If you see that the camera feed is not working, it is recommended to check whether the C22 capacitor is soldered, if yes, you can remove that.
- Memory card circuit
The memory card uses high-speed four-wire data SPI interface
Ai-thinker AiPi-Cam-D Pinouts
Ai-thinker AiPi-Cam-D Documentation
Ai-Thinker official website docs๏ผโhttps://docs.ai-thinker.com/cam-u
I hope you found the blog useful. I am planning to give these development boards a try soon in one of my projects.
I work as an embedded systems design consultant, helping companies build custom embedded products and develop test automation solutions for their PCBs.
If you have any feedback about the blog, you can share it in the comments below or contact me directly.